E36 Subframe Mount Reinforcement Plates
Fits:Ā All E36 Non-M, E36 M3 (Excluding Hatch)
Benefits:
-Reinforces theĀ Rear Subframe Mounts
-Prevents catastrophic suspension failure.
Note:Ā These products require welding to install.
Recommendations:Ā
-Pair this product withĀ Rear Trailing Arm Mount Reinforcement PlatesĀ if not reinforced prior.
Material:Ā
-2.5mm 250MPa yield zinc coated mild steel (zincanneal)
It is a well known issue that the E36 subframeĀ mountsĀ suffer from fatigue related cracking just like on the E46 however, to a much lesser extent and localised to just the bushings mating face.
These plates are designed to tie into the factory spot welds securing the female threaded insert within the chassis to provide the strongest connection and reinforce against fatigue.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
E36 Subframe Mount Reinforcement Plates
E36 Subframe Mount Reinforcement Plates
Fits:Ā All E36 Non-M, E36 M3 (Excluding Hatch)
Benefits:
-Reinforces theĀ Rear Subframe Mounts
-Prevents catastrophic suspension failure.
Note:Ā These products require welding to install.
Recommendations:Ā
-Pair this product withĀ Rear Trailing Arm Mount Reinforcement PlatesĀ if not reinforced prior.
Material:Ā
-2.5mm 250MPa yield zinc coated mild steel (zincanneal)
It is a well known issue that the E36 subframeĀ mountsĀ suffer from fatigue related cracking just like on the E46 however, to a much lesser extent and localised to just the bushings mating face.
These plates are designed to tie into the factory spot welds securing the female threaded insert within the chassis to provide the strongest connection and reinforce against fatigue.
Original: $34.06
-65%$34.06
$11.92Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Fits:Ā All E36 Non-M, E36 M3 (Excluding Hatch)
Benefits:
-Reinforces theĀ Rear Subframe Mounts
-Prevents catastrophic suspension failure.
Note:Ā These products require welding to install.
Recommendations:Ā
-Pair this product withĀ Rear Trailing Arm Mount Reinforcement PlatesĀ if not reinforced prior.
Material:Ā
-2.5mm 250MPa yield zinc coated mild steel (zincanneal)
It is a well known issue that the E36 subframeĀ mountsĀ suffer from fatigue related cracking just like on the E46 however, to a much lesser extent and localised to just the bushings mating face.
These plates are designed to tie into the factory spot welds securing the female threaded insert within the chassis to provide the strongest connection and reinforce against fatigue.
